Top

On-Premise Installation - 5.2, 5.3 and 5.5 Update Instructions

When updating to V5.2 or 5.3 it is important to have addressed all the changes for upgrading to V5 first.  See Further Reading below for a link to those instructions.

Once that has been accomplished please proceed with the following configuration changes:

 


Step 1

Please add the following line to your web.config. This line should be within the <handlers> section

<add name="WebhookHandler" verb="POST" path="bridge/listener/*" type="ConceptShare.V4.Web.WebhookHandler, ConceptShare.V4.Framework" />

 


Step 2

 Please remove the following lines from your web.config if it exists. These lines should be within the <handlers> section.

<remove name="AnnotatorApiHandler" />

<add name="AnnotatorApiHandler" verb="*" path="annotator.ashx" type="ConceptShare.V4.Annotator.AnnotatorApiHandler, ConceptShare.V4.Framework" />

 


Step 3 for 5.3

 Please add the following lines to your web.config under system.webServer\staticContent.

<remove fileExtension=".woff2" />
<mimeMap fileExtension=".woff2" mimeType="font/woff2" />

 


Step 4 for 5.5

Please update Web.config and ConceptShare.V4.Queue.exe.config:

FROM:

<dependentAssembly>
  <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />                  
  <bindingRedirect oldVersion="0.0.0.0-8.0.0.0" newVersion="8.0.0.0" />
 </dependentAssembly>

TO:

<dependentAssembly>
  <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />                  
  <bindingRedirect oldVersion="0.0.0.0-9.0.0.0" newVersion="9.0.0.0" />
 </dependentAssembly>

 


Congratulations!

 You have successfully established the changes for V5.2, V5.3 and V5.5 for your On Premise deployment.


 

Further Reading

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request